| |
Heat Shrinkable Medium Voltage Breakouts
|
(Heat Shrink Non-Tracking Medium Voltage Cable Breakouts) |
| |
|
|
| Product Data Sheet |
| |
| Characteristics |
| |
| This data sheet covers the requirements for heat shrink medium voltage breakouts whose dimension will shrink to a predetermined size upon the application of heat above 125 deg. C. Color of the MV breakouts is reddish brown. The MV breakouts are electrically insulating, anti-tracking, UV resistant, weather proof and flame retardant. MV breakouts have three fingers. The main body is internally coated with mastic and covered with a release paper. |
| |
| Typical Applications |
| The cable breakouts provide insulation and sealing over the crutch of multi-core cables. The mastic sealant provides a water tight environmental seal to the cable. The MV cable breakouts are normally used as an integral part of 3-core cable terminations up to 36 kV. |
The following application table gives the MV breakout dimensions.
|
Breakout
Model |
Breakout main diameter |
Finger Diameter |
Full Length |
Finger Length |
R (mm) |
S (mm) |
R (mm) |
S (mm) |
R (mm) |
R (mm) |
IXL 310 |
22.00 |
60.00 |
8.00 |
24.00 |
185.00 |
45.00 |
IXL 320 |
33.00 |
80.00 |
16.00 |
36.00 |
210.00 |
50.00 |
IXL 330 |
47.00 |
110.00 |
20.00 |
48.00 |
225.00 |
75.00 |
IXL 335 |
47.00 |
125.00 |
20.00 |
55.00 |
250.00 |
75.00 |
IXL 340 |
54.00 |
140.00 |
27.00 |
62.00 |
240.00 |
65.00 |
|
S: As Supplied R: Fully Recovered |
Engineering Drawings
Medium Voltage Breakouts |
| |
| Materials |
| |
| The base material of the MV breakouts is thermally stabilized, cross linked blend of polyolefin and a compatible grade of synthetic rubber. The basic resin is mixed with chemical additives offering resistance against tracking - erosion, fire, oxidation, ozone and other environmental effects. The sealant is butyl rubber based mastic which is electrical insulating, water -proof and anti-tracking. |
| |
|
| |
| Printing on the Product |
| |
| Each Ikebana breakout is printed with a heat resistant printing ink of white color.
Printed information includes: 1. Ikebana logo
2. Product code (either of breakout or of the termination) |
| |
| Packaging |
| |
| MV breakouts are packed individually in a polythene bag. A specified number of MV breakouts are packed inside a standard corrugated carton. The outer carton carries an IKEBANA label with information of the contents and the customer's name. Please refer to the packing information for the numbers. |
| |
