| |
Heat shrinkable Conductive Breakouts |
(Heat Shrink Semi-Conductive Cable Breakouts)
|
| |
|
|
| Product Data Sheet |
| |
| Characteristics |
| |
| This data sheet covers the requirements for heat shrink conductive breakouts whose dimensions will shrink to a predetermined size upon the application of heat above 125 deg. C. Color of the conductive breakouts is black. The conductive breakouts are electrically semi conductive, UV resistant and weather proof. Conductive breakouts have three fingers. The main body is coated internally with mastic and covered with a release paper. |
| |
| Typical Applications |
| The conductive breakouts provide a semi conductive screen and sealing over the crutch of multi-core cables. The mastic sealant provides a water tight environmental seal to the cable. The conductive cable breakouts are normally used as an integral part of 3-core cable terminations up to 36 kV and also in 3-core cable joints up to 36 kV. |
The following application table gives the conductive breakout dimensions.
|
Conductive
Breakout
Model
|
Breakout main diameter
|
Finger Diameter |
Full Length |
Finger Length |
R (mm) |
S (mm)
|
R (mm) |
S (mm)
|
R (mm) |
R (mm) |
IXL 310 CON |
22.00 |
60.00 |
8.00 |
24.00 |
185.00 |
45.00 |
IXL 320 CON |
33.00 |
80.00 |
16.00 |
36.00 |
210.00 |
50.00 |
IXL 330 CON |
47.00 |
110.00 |
20.00 |
48.00 |
225.00 |
75.00 |
IXL 335 CON |
47.00 |
125.00 |
20.00 |
55.00 |
250.00 |
75.00 |
IXL 340 CON |
54.00 |
140.00 |
27.00 |
62.00 |
240.00 |
65.00 |
|
S: As Supplied R: Fully Recovered |
Engineering Drawings
Conductive Breakouts |
| |
| Materials |
| |
| The base material of the conductive breakouts is thermally stabilized, cross linked polyolefin. The basic resin is mixed with chemical additives offering resistance against UV radiation, oxidation, ozone and other environmental effects. The most important additive is conductive carbon black, which adds electrical conductivity to the material. The sealant is butyl rubber based mastic which is electrical insulating and water-proof. |
| |
|
| |
| Printing on the Product |
| |
Each Ikebana breakout is printed with a heat resistant printing ink of white color.
Printed information includes:
1. Ikebana logo
2. Product code |
| |
| Packaging |
| |
| Conductive breakouts are packed individually in a polythene bag. A specified number of conductive breakouts are packed inside a standardized Ikebana corrugated carton with strapping and a label with information of customer and contents. It also has QA approval seal. Cartons containing conductive breakouts should not be stored exposed to direct sunlight. Black color of CON breakouts coupled with conductive property absorbs heat and may shrink even when the ambient temperature is much lower than normal shrinking temperature. |
| |
